Tenax Travertine Filler Semisolid Buff
Tenax Travertine Filler Semisolid Buff
Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.
Instructions for use:
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2-3% in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.
25°C = 77°
Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65° - 77°.
Safety:
Please read the safety data sheet before using.
- Gel time in bulk at 77º: 2-3 min
- Tacky free time at 77º: 10-15 min
- Working time at 77º: 30-40 min
- Temp range for use after hardening: 32º to 230º
- Ratio of glue to hardener: 100/2-3% in weight
Tenax Travertine Filler Semisolid Buff
Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.
Instructions for use:
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2-3% in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.
25°C = 77°
Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65° - 77°.
Safety:
Please read the safety data sheet before using.
- Gel time in bulk at 77º: 2-3 min
- Tacky free time at 77º: 10-15 min
- Working time at 77º: 30-40 min
- Temp range for use after hardening: 32º to 230º
- Ratio of glue to hardener: 100/2-3% in weight
Original: $11.42
-70%$11.42
$3.43Description
Tenax Travertine Filler Semisolid Buff
Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.
Instructions for use:
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2-3% in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.
25°C = 77°
Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65° - 77°.
Safety:
Please read the safety data sheet before using.
- Gel time in bulk at 77º: 2-3 min
- Tacky free time at 77º: 10-15 min
- Working time at 77º: 30-40 min
- Temp range for use after hardening: 32º to 230º
- Ratio of glue to hardener: 100/2-3% in weight
